Pressure explosion-proof transmitter, supply industrial pressure transmitter pressure transmitter working
Pressure transmitters When measuring steam or other high temperature media, in order to connect the transmitter and the pipeline, a heat pipe should be used and the pressure on the pipe should be transmitted to the transformer. When the measured medium is water vapor, the heat pipe Inject a proper amount of water to prevent the superheated steam from coming into direct contact with the transmitter, causing damage to the sensor.
During the pressure transmission process, it should be noted that the connection between the transmitter and the heat pipe should not be leaked. Be careful when opening the valve to avoid direct impact of the measured medium and damage the sensor diaphragm. The pipe must be kept clear to avoid deposition in the pipe. The device pops up and damages the sensor diaphragm. Do not use a voltage higher than 36V, which may cause damage.