## The Sensor terminology

time£º2018-04-25 17:51    source£ºair pressure sensor

The Sensor terminology

1. Measurement range

The range of measured values ​​within the allowable margin of error.

2. Range

The algebraic difference between the upper and lower limits of the measurement range.

3. Accuracy

The degree of agreement between the measured result and the true value.

4. Repeatability

The degree of coincidence between the results of multiple consecutive measurements of the same measured quantity under all of the following conditions: the same measurement method, the same observer, the same measuring instrument, the same location, the same use conditions, and within a short period of time repeat.

5. Resolution

The smallest possible amount of change that the sensor may detect in the specified measurement range circle.

6. Threshold

The smallest change that can be measured at the output of the sensor to produce a measurable change.

7. Zero position

Make the absolute value of the output minimum, such as the equilibrium state.

8. Incentive

The external energy (voltage or current) applied to make the sensor work properly.

9. Maximum incentive

The maximum value of the excitation voltage or current that can be applied to the sensor.

10. Input impedance

When the output is short-circuited, the measured impedance of the sensor input.

11. Output

There is an amount of electricity generated by the sensor that is measured as a function of the sum.

12. Output impedance

The measured impedance at the output of the sensor when the input is short-circuited.

13. Zero output

The output of the sensor is added when it is measured to zero.

14. Lag

Within the specified range, the maximum difference that occurs in the output when the measured value increases and decreases.

15. Late

The time delay of the change in the output signal relative to the input signal.

16. Drift

At certain intervals of time, the amount of unwanted change in the sensor output that is independent of the measured value.

17. Zero drift

Change at zero output during specified time intervals and room conditions.

18. Sensitivity

The ratio of the sensor output increment to the corresponding input increment.

19. Sensitivity drift

Changes in the slope of the calibration curve due to changes in sensitivity.

20. Thermal sensitivity drift

Sensitivity drift due to changes in sensitivity.

21. Hot zero drift

Zero drift due to changes in ambient temperature.

22. Linearity

The extent to which the calibration curve is consistent with a provision.

23. Non-linearity

The degree to which the calibration curve deviates from a given straight line.

24. Long-term stability

The sensor can still maintain its ability to exceed the allowable error for a specified period of time.

25. Natural frequency

When there is no resistance, the sensor is free (without external force) oscillation frequency.

26. Response

The characteristics of the measured change at the time of output.

27. Compensation temperature range

Keep the sensor within the temperature range compensated by the zero balance within the range and the specified limits.

28. Creep

When the machine to be measured has a constant environmental condition, when specified

### air pressure sensor Related articles

The origin of 4-20mA gas pres
2018-04-26
Pressure sensor operating temp
2018-04-26
The importance of air pressure
2018-04-26
SHELOK pressure sensor classi
2018-04-26
Pressure sensor wiring method
2018-04-26
Pressure sensor development
2018-04-26
Intelligent pressure transmitt
2018-04-26
Application of New Pressure Se
2018-04-26